The Idea:

For a long time, we’ve wanted to create a tool that makes filling and bleeding Awesomatix dampers easier and more reliable. Now it’s finally here!

The Challenge:

The new damper is a real technical improvement over the MMX, but clean filling without air bubbles has often been a test of patience.

Our Solution:

We raise the damper on the cap side so the screws are completely surrounded by oil – and where there’s oil, there’s no room for air.

What the Tool Can Do:

Fully refill the damper after opening the cap

Or simply bleed out air if bubbles have formed

See How It Works in Our Video:

By moving the damper arm up and down, you create targeted pull and push motions to pump out the remaining air from the damper.

Pro Tip:

Don’t skimp on oil!

If the cap isn’t filled sufficiently, the damper might draw in air again on rebound – which would undo the whole effect.