 |
Team Associated RC10B74.1Car by Team Associated Setups |
 |
Team Associated RC10B6.2Car by Team Associated Setups |
 |
Team Associated TC7.2Car by Team Associated Setups |
Showing the 5 latest updated items, Click here to see all.
ÄkpaRC Club websiteI am the creator and admin for this site.
|
Youtube channelFinnish/international content.
|
Category Cars
Class Offroad
Scale/Size 1/10
Power Electric
Products Car
Skills Creating Content
![Team Associated RC10B74.1](javascript:showProduct({"id":1775,"picture":"","specification":null,"notes":null,"user_id":2002,"product_id":85,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2021-03-25T11:39:31.000000Z","updated_at":"2021-03-25T11:39:31.000000Z","status_id":null,"product":{"id":85,"name":"RC10B74.1","shortname":null,"fullname":"Team Associated RC10B74.1","description":"The off-road RC car racing scene has changed over the past few years, with turf and carpet racing becoming more popular and grip levels at an all-time high. The engineers inside Team Associated\u0027s Area 51 were quick to answer the 4WD class with the RC10B74 Team Kit, a completely new chassis configuration equipped with a long list of features designed to give you the winning edge.\r\n\r\nThe engineering continues. The B74.1 platform introduces the use of two separate chassis configurations. The B74.1 is the buggy of choice for high-grip carpet or turf track surfaces with its next-generation Octalock 2-Pad high-load, high-capacity, center slipper clutch and optimized carpet kit setup. The B74.1D includes a center differential with 200,000 cSt silicone fluid and an optimized dirt kit setup.\r\n\r\nBoth kits utilize redesigned, low-profile shock towers with shorter shock shafts and bodies to lower the center of gravity, providing more predictable handling. Also included in both kits are new low roll center (LRC) C and D arm mounts, 66mm CVA bones and axles, and 2.0mm G10 fiberglass chassis brace supports, which all add up to making the B74.1 and B74.1D easier to drive, and easier to push hard on all track surfaces.\r\n\r\nSetups and tuning parts are interchangeable between the B74.1 and B74.1D. Both versions come with the speed, durability, and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!\r\n\r\nNEW Features Next-generation 2-Pad high-load, high-capacity Octalock center slipper clutch with LCF pad material New Octalock design features keyed spur gear and LCF slipper pads with 8 locking tabs 2.0mm anti-roll bars included front and rear 6.0mm rear hex adapters Updated kit setup includes V2 red front and V2 blue rear springs Shorter 23mm front and 27.5mm rear 12mm threaded aluminum shocks with machined pistons and internal X-rings New 4mm carbon fiber front shock tower has been lowered by 2mm and features an additional row of camber link positions New 4mm carbon fiber rear shock tower lowered by 5.5mm +3mm aluminum steering rack 66mm rear CVA driveshafts and axles New molded ESC tray New molded 30mm fan mount (fan not included) UPDATED Features Updated aluminum LRC C and D suspension 2.0mm G10 chassis brace supports Simplified 2.5mm carbon fiber battery strap with indexed battery locations, easy height setup, and battery removal for both standard and low-profile shorty batteries New low-profile molded plastic battery posts included in addition to standard posts New 16mm differential outdrives with a more durable, lightweight design Updated rear wing with optional low trim line for reduced drag Updated symmetrical rear arms with new shock mounting position (farther inside) Updated plastic rear hubs for more durability on the upper link mount. RC10B74.1 hubs continue with the aluminum rear hub link mount and axle height adjustment in 1mm increments for fine tuning Updated 2.5mm carbon fiber steering arms Updated steering blocks with 5x12mm outer ball bearings with steel crush tubes for improved durability Updated V2 2mm hard-anodized 7075-T6 aluminum chassis with spur gear clearance and updated mount holes for ESC tray LEGACY B74 Features 7075-T6 aluminum bulkheads with quick-change 0mm-3mm adjustable differential height for low ride-height on carpet while maintaining efficient driveshaft alignment Interchangeable use of center differential or slipper clutch without changing center driveshafts Easy access differentials 7075-T6 aluminum arm mounts use inserts for fine tuning a large range of anti-squat, kick-up, and toe adjustments Front and rear anti-roll bars use a common shape for minimal spare part count 7075-T6 aluminum sliding motor mount and center bulkhead with increased rigidity 7075-T6 aluminum 9-degree caster blocks Floating servo mount with 7075-T6 aluminum mount and 2.5mm carbon fiber brace Lightweight clear body and wing included","picture":"images\/1354\/conversions\/Ib3MsgPEOUe0klchpmkmAJcc1WSReuR8peoDgZVJ-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC10B74.1\/Team\/","organization_id":13,"user_id":165,"user_is_owner":0,"type_id":"car","year":null,"created_at":"2020-10-01T21:04:34.000000Z","updated_at":"2021-09-19T17:05:20.000000Z","interactivity_id":null,"status_id":null,"url2":null,"type":{"id":"car","name":"Car","shortname":null,"description":"Car","config":null,"filter":"cars","icon":"directions_car","color":null,"default":0,"disabled":0,"order":1,"type_id":"product","created_at":"2019-10-31T23:45:39.000000Z","updated_at":"2020-10-23T17:47:55.000000Z"}}}, "https://pixits.racing/setups?user_id=2002&product_id=85&userproduct_id=1775", "https://pixits.racing/users?product_id=85")){kind=link}
![Team Associated RC10B6.2](javascript:showProduct({"id":1776,"picture":"","specification":null,"notes":null,"user_id":2002,"product_id":82,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2021-03-25T11:39:50.000000Z","updated_at":"2021-03-25T11:39:50.000000Z","status_id":null,"product":{"id":82,"name":"RC10B6.2","shortname":null,"fullname":"Team Associated RC10B6.2","description":"Champions by design. 1:10 scale 2WD off road has been Team Associated\u0027s signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 13 of the 18 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more 2WD I.F.M.A.R World Championships than all other manufacturers combined!\r\n\r\nThe engineering continues. The B6 platform introduced the use of two separate chassis configurations -- the B6.2 continues this theme. The B6.2 will be the buggy of choice for high-grip carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance. The B6.2D includes both Layback and Laydown transmission assemblies to fine-tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor-sharp feel and control.\r\n\r\nBoth cars share many great features, such as an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, new symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a new slipper assembly. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, fan, and pinion gear. Assembly and painting required. Features Lightweight 7075-T6 hard anodized and +3mm increased length New symmetric 75mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position Longer rear arm (75mm) improves stability and jump landing Outer rear hinge pins captured with bolt head and lock nut for increased durability Updated left side rail with motor fan mount (fan not included) New rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment New front wing mount and front wing included Bolt-on +1 steering block arms for improved steering response 69mm CVA bones for reduced bone plunge and minimized friction at drive pin New body design with lower center of mass Clear body and wing included 24g and 36g steel chassis weights included for improved balance and lower overall center of mass 5mm aluminum clamping wheel hexes Fluid filled gear differential 3-gear Laydown Stealth(R) transmission for lower and forward CG Differential height adjustment with 0, 1, 2, and 3mm inserts included 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat and toe adjustments Heavy-duty V2 routed graphite front shock tower with tower guard Heavy-duty V2 routed graphite rear tower, standard V2 12mm Big Bore threaded aluminum shocks with X-rings","picture":"images\/1352\/conversions\/IOOV0boRfy5ywlXYlYwCOIXDIuL3giL7D5E77FKP-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC10B6.2\/Team\/","organization_id":13,"user_id":165,"user_is_owner":0,"type_id":"car","year":null,"created_at":"2020-10-01T21:01:20.000000Z","updated_at":"2021-09-19T17:05:20.000000Z","interactivity_id":null,"status_id":null,"url2":null,"type":{"id":"car","name":"Car","shortname":null,"description":"Car","config":null,"filter":"cars","icon":"directions_car","color":null,"default":0,"disabled":0,"order":1,"type_id":"product","created_at":"2019-10-31T23:45:39.000000Z","updated_at":"2020-10-23T17:47:55.000000Z"}}}, "https://pixits.racing/setups?user_id=2002&product_id=82&userproduct_id=1776", "https://pixits.racing/users?product_id=82")){kind=link}
![Team Associated TC7.2](javascript:showProduct({"id":1777,"picture":"","specification":null,"notes":null,"user_id":2002,"product_id":204,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2021-03-25T11:40:10.000000Z","updated_at":"2021-03-25T11:40:10.000000Z","status_id":null,"product":{"id":204,"name":"TC7.2","shortname":null,"fullname":"Team Associated TC7.2","description":"Team Associated is proud to announce their newest 1:10 scale 4WD electric touring car kit, the TC7.2 Factory Team Kit, the next generation in the TC7 lineage.\r\n\r\nWith current touring car platforms reaching higher plateaus of precision and performance, the engineers behind the doors of Area 51 wasted no time to ensure that the TC7 exceeds expectations. The TC7.2 comes packed with a host of new components and the features necessary to keep you on top.\r\n\r\nAs the on-road market advances at an ever-increasing rate, more is demanded from the chassis to accommodate the ultra-competitive racing classes. A successor to the TC7.1, the TC7.2 maintains the proven suspension geometry, but adds refinement to chassis balance and the flex necessary for today\u0027s racing class. The centrally positioned IFM (Inline Flex Mount) motor mount adds several mounting configurations to help fine-tune chassis flex to the racing surface, and has an integral mounting position for an optional chassis pitch control system (PCS). The TC7.2 also carries an all-new aluminum rear gear differential for the ultimate in precision and heat dissipation, as well as an ultra-light front spool assembly. Along with a list of new features, the TC7.2 Factory Team gives you everything you need to race at the highest level -- all without sacrificing low part count or affordability. A well-refined racing chassis with success in its heritage, the TC7.2 Factory Team Kit is another \u0022Champion by Design\u0022 from Team Associated!\r\n\r\nThis vehicle needs extra parts to make it operational. Click on the Specifications tab above to see what extra equipment you\u0027ll need to make the vehicle operational, such as motor and battery pack.\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. RC10TC7 Factory Team Kit shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, body, and pinion gear. Assembly and painting required.\r\n\r\nGet more in-depth details of the following features on [page 2 of the TC7.2 manual](https:\/\/img2.associatedelectrics.com\/pdf\/manual-TC7.2-30122-p2.pdf).\r\n\r\n**Features**\r\n* All-new, ultra-precise aluminum rear gear diff for maximum performance\r\n* Ultra-lightweight front spool with replaceable hardened steel outdrives\r\n* One-piece IFM (Inline Flex Mount) motor mount system\r\n* Updated bearing caps with integral camber link mount for ultra-fine link length adjustments\r\n* Updated floating servo mount\r\n* New battery mounting system for greater adjustability\r\n* Updated narrow chassis shape with optimized flex characteristics\r\n* PCS (Pitch Control System) option to further adjust chassis flex characteristics\r\n* FOX(R) Shock Bodies with Genuine Kashima(R) Coat, SS\r\n* DCV (Dual Constant Velocity) drive shaft assemblies included for front drive\r\n* Ultra-lightweight carbon composite suspension components\r\n* Aluminum rear CV bones\r\n* 26 precision ball bearings","picture":"images\/1460\/conversions\/0aG7tjR2KuJ4Ch09cE9b1KITe2woBs9fT5HtXteI-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/TC7.2\/TC7.2\/","organization_id":13,"user_id":116,"user_is_owner":0,"type_id":"car","year":2018,"created_at":"2020-10-28T11:36:45.000000Z","updated_at":"2021-09-19T17:06:01.000000Z","interactivity_id":null,"status_id":null,"url2":null,"type":{"id":"car","name":"Car","shortname":null,"description":"Car","config":null,"filter":"cars","icon":"directions_car","color":null,"default":0,"disabled":0,"order":1,"type_id":"product","created_at":"2019-10-31T23:45:39.000000Z","updated_at":"2020-10-23T17:47:55.000000Z"}}}, "https://pixits.racing/setups?user_id=2002&product_id=204&userproduct_id=1777", "https://pixits.racing/users?product_id=204")){kind=link}
![Winter Jumps Äänekoski 2022](javascript:showSetup({"id":228,"name":"Winter Jumps \u00c4\u00e4nekoski 2022","notes":null,"file":"setups\/5is7SNZ9tF1fRJ0WCIGCcnPWStAWaBvOnTDPF7eD.pdf","user_id":2002,"userproduct_id":1776,"product_id":82,"place_id":1606,"event_id":null,"evententry_id":null,"setup_date":null,"created_at":"2022-02-28T08:54:58.000000Z","updated_at":"2022-02-28T08:54:58.000000Z","url":null,"show_url":"https:\/\/pixits.racing\/setups\/228","product":{"id":82,"name":"RC10B6.2","shortname":null,"fullname":"Team Associated RC10B6.2","description":"Champions by design. 1:10 scale 2WD off road has been Team Associated\u0027s signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 13 of the 18 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more 2WD I.F.M.A.R World Championships than all other manufacturers combined!\r\n\r\nThe engineering continues. The B6 platform introduced the use of two separate chassis configurations -- the B6.2 continues this theme. The B6.2 will be the buggy of choice for high-grip carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance. The B6.2D includes both Layback and Laydown transmission assemblies to fine-tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor-sharp feel and control.\r\n\r\nBoth cars share many great features, such as an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, new symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a new slipper assembly. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, fan, and pinion gear. Assembly and painting required. Features Lightweight 7075-T6 hard anodized and +3mm increased length New symmetric 75mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position Longer rear arm (75mm) improves stability and jump landing Outer rear hinge pins captured with bolt head and lock nut for increased durability Updated left side rail with motor fan mount (fan not included) New rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment New front wing mount and front wing included Bolt-on +1 steering block arms for improved steering response 69mm CVA bones for reduced bone plunge and minimized friction at drive pin New body design with lower center of mass Clear body and wing included 24g and 36g steel chassis weights included for improved balance and lower overall center of mass 5mm aluminum clamping wheel hexes Fluid filled gear differential 3-gear Laydown Stealth(R) transmission for lower and forward CG Differential height adjustment with 0, 1, 2, and 3mm inserts included 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat and toe adjustments Heavy-duty V2 routed graphite front shock tower with tower guard Heavy-duty V2 routed graphite rear tower, standard V2 12mm Big Bore threaded aluminum shocks with X-rings","picture":"images\/1352\/conversions\/IOOV0boRfy5ywlXYlYwCOIXDIuL3giL7D5E77FKP-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC10B6.2\/Team\/","organization_id":13,"user_id":165,"user_is_owner":0,"type_id":"car","year":null,"created_at":"2020-10-01T21:01:20.000000Z","updated_at":"2021-09-19T17:05:20.000000Z","interactivity_id":null,"status_id":null,"url2":null},"user_product":{"id":1776,"picture":"","specification":null,"notes":null,"user_id":2002,"product_id":82,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2021-03-25T11:39:50.000000Z","updated_at":"2021-03-25T11:39:50.000000Z","status_id":null,"product":{"id":82,"name":"RC10B6.2","shortname":null,"fullname":"Team Associated RC10B6.2","description":"Champions by design. 1:10 scale 2WD off road has been Team Associated\u0027s signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 13 of the 18 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more 2WD I.F.M.A.R World Championships than all other manufacturers combined!\r\n\r\nThe engineering continues. The B6 platform introduced the use of two separate chassis configurations -- the B6.2 continues this theme. The B6.2 will be the buggy of choice for high-grip carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance. The B6.2D includes both Layback and Laydown transmission assemblies to fine-tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor-sharp feel and control.\r\n\r\nBoth cars share many great features, such as an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, new symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a new slipper assembly. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, fan, and pinion gear. Assembly and painting required. Features Lightweight 7075-T6 hard anodized and +3mm increased length New symmetric 75mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position Longer rear arm (75mm) improves stability and jump landing Outer rear hinge pins captured with bolt head and lock nut for increased durability Updated left side rail with motor fan mount (fan not included) New rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment New front wing mount and front wing included Bolt-on +1 steering block arms for improved steering response 69mm CVA bones for reduced bone plunge and minimized friction at drive pin New body design with lower center of mass Clear body and wing included 24g and 36g steel chassis weights included for improved balance and lower overall center of mass 5mm aluminum clamping wheel hexes Fluid filled gear differential 3-gear Laydown Stealth(R) transmission for lower and forward CG Differential height adjustment with 0, 1, 2, and 3mm inserts included 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat and toe adjustments Heavy-duty V2 routed graphite front shock tower with tower guard Heavy-duty V2 routed graphite rear tower, standard V2 12mm Big Bore threaded aluminum shocks with X-rings","picture":"images\/1352\/conversions\/IOOV0boRfy5ywlXYlYwCOIXDIuL3giL7D5E77FKP-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC10B6.2\/Team\/","organization_id":13,"user_id":165,"user_is_owner":0,"type_id":"car","year":null,"created_at":"2020-10-01T21:01:20.000000Z","updated_at":"2021-09-19T17:05:20.000000Z","interactivity_id":null,"status_id":null,"url2":null}}})){kind=link}
![Winter Jumps Hakkila 2021](javascript:showSetup({"id":226,"name":"Winter Jumps Hakkila 2021","notes":null,"file":"setups\/nSnAY6d17cpUoGgk0OfFeMlNupxr9BEdnrnn4jnn.pdf","user_id":2002,"userproduct_id":1776,"product_id":82,"place_id":1345,"event_id":null,"evententry_id":null,"setup_date":null,"created_at":"2022-02-18T16:45:46.000000Z","updated_at":"2022-02-18T16:45:46.000000Z","url":null,"show_url":"https:\/\/pixits.racing\/setups\/226","product":{"id":82,"name":"RC10B6.2","shortname":null,"fullname":"Team Associated RC10B6.2","description":"Champions by design. 1:10 scale 2WD off road has been Team Associated\u0027s signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 13 of the 18 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more 2WD I.F.M.A.R World Championships than all other manufacturers combined!\r\n\r\nThe engineering continues. The B6 platform introduced the use of two separate chassis configurations -- the B6.2 continues this theme. The B6.2 will be the buggy of choice for high-grip carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance. The B6.2D includes both Layback and Laydown transmission assemblies to fine-tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor-sharp feel and control.\r\n\r\nBoth cars share many great features, such as an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, new symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a new slipper assembly. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, fan, and pinion gear. Assembly and painting required. Features Lightweight 7075-T6 hard anodized and +3mm increased length New symmetric 75mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position Longer rear arm (75mm) improves stability and jump landing Outer rear hinge pins captured with bolt head and lock nut for increased durability Updated left side rail with motor fan mount (fan not included) New rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment New front wing mount and front wing included Bolt-on +1 steering block arms for improved steering response 69mm CVA bones for reduced bone plunge and minimized friction at drive pin New body design with lower center of mass Clear body and wing included 24g and 36g steel chassis weights included for improved balance and lower overall center of mass 5mm aluminum clamping wheel hexes Fluid filled gear differential 3-gear Laydown Stealth(R) transmission for lower and forward CG Differential height adjustment with 0, 1, 2, and 3mm inserts included 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat and toe adjustments Heavy-duty V2 routed graphite front shock tower with tower guard Heavy-duty V2 routed graphite rear tower, standard V2 12mm Big Bore threaded aluminum shocks with X-rings","picture":"images\/1352\/conversions\/IOOV0boRfy5ywlXYlYwCOIXDIuL3giL7D5E77FKP-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC10B6.2\/Team\/","organization_id":13,"user_id":165,"user_is_owner":0,"type_id":"car","year":null,"created_at":"2020-10-01T21:01:20.000000Z","updated_at":"2021-09-19T17:05:20.000000Z","interactivity_id":null,"status_id":null,"url2":null},"user_product":{"id":1776,"picture":"","specification":null,"notes":null,"user_id":2002,"product_id":82,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2021-03-25T11:39:50.000000Z","updated_at":"2021-03-25T11:39:50.000000Z","status_id":null,"product":{"id":82,"name":"RC10B6.2","shortname":null,"fullname":"Team Associated RC10B6.2","description":"Champions by design. 1:10 scale 2WD off road has been Team Associated\u0027s signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 13 of the 18 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more 2WD I.F.M.A.R World Championships than all other manufacturers combined!\r\n\r\nThe engineering continues. The B6 platform introduced the use of two separate chassis configurations -- the B6.2 continues this theme. The B6.2 will be the buggy of choice for high-grip carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance. The B6.2D includes both Layback and Laydown transmission assemblies to fine-tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor-sharp feel and control.\r\n\r\nBoth cars share many great features, such as an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, new symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a new slipper assembly. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, fan, and pinion gear. Assembly and painting required. Features Lightweight 7075-T6 hard anodized and +3mm increased length New symmetric 75mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position Longer rear arm (75mm) improves stability and jump landing Outer rear hinge pins captured with bolt head and lock nut for increased durability Updated left side rail with motor fan mount (fan not included) New rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment New front wing mount and front wing included Bolt-on +1 steering block arms for improved steering response 69mm CVA bones for reduced bone plunge and minimized friction at drive pin New body design with lower center of mass Clear body and wing included 24g and 36g steel chassis weights included for improved balance and lower overall center of mass 5mm aluminum clamping wheel hexes Fluid filled gear differential 3-gear Laydown Stealth(R) transmission for lower and forward CG Differential height adjustment with 0, 1, 2, and 3mm inserts included 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat and toe adjustments Heavy-duty V2 routed graphite front shock tower with tower guard Heavy-duty V2 routed graphite rear tower, standard V2 12mm Big Bore threaded aluminum shocks with X-rings","picture":"images\/1352\/conversions\/IOOV0boRfy5ywlXYlYwCOIXDIuL3giL7D5E77FKP-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC10B6.2\/Team\/","organization_id":13,"user_id":165,"user_is_owner":0,"type_id":"car","year":null,"created_at":"2020-10-01T21:01:20.000000Z","updated_at":"2021-09-19T17:05:20.000000Z","interactivity_id":null,"status_id":null,"url2":null}}})){kind=link}
![Winter Jumps Turku 2021](javascript:showSetup({"id":225,"name":"Winter Jumps Turku 2021","notes":null,"file":"setups\/6ht0WWONZ8Vw21fGskAmMmN4OZtWZsZiuKBVtRqU.pdf","user_id":2002,"userproduct_id":1776,"product_id":82,"place_id":null,"event_id":null,"evententry_id":null,"setup_date":null,"created_at":"2022-02-18T16:42:15.000000Z","updated_at":"2022-02-18T16:42:15.000000Z","url":null,"show_url":"https:\/\/pixits.racing\/setups\/225","product":{"id":82,"name":"RC10B6.2","shortname":null,"fullname":"Team Associated RC10B6.2","description":"Champions by design. 1:10 scale 2WD off road has been Team Associated\u0027s signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 13 of the 18 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more 2WD I.F.M.A.R World Championships than all other manufacturers combined!\r\n\r\nThe engineering continues. The B6 platform introduced the use of two separate chassis configurations -- the B6.2 continues this theme. The B6.2 will be the buggy of choice for high-grip carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance. The B6.2D includes both Layback and Laydown transmission assemblies to fine-tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor-sharp feel and control.\r\n\r\nBoth cars share many great features, such as an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, new symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a new slipper assembly. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, fan, and pinion gear. Assembly and painting required. Features Lightweight 7075-T6 hard anodized and +3mm increased length New symmetric 75mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position Longer rear arm (75mm) improves stability and jump landing Outer rear hinge pins captured with bolt head and lock nut for increased durability Updated left side rail with motor fan mount (fan not included) New rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment New front wing mount and front wing included Bolt-on +1 steering block arms for improved steering response 69mm CVA bones for reduced bone plunge and minimized friction at drive pin New body design with lower center of mass Clear body and wing included 24g and 36g steel chassis weights included for improved balance and lower overall center of mass 5mm aluminum clamping wheel hexes Fluid filled gear differential 3-gear Laydown Stealth(R) transmission for lower and forward CG Differential height adjustment with 0, 1, 2, and 3mm inserts included 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat and toe adjustments Heavy-duty V2 routed graphite front shock tower with tower guard Heavy-duty V2 routed graphite rear tower, standard V2 12mm Big Bore threaded aluminum shocks with X-rings","picture":"images\/1352\/conversions\/IOOV0boRfy5ywlXYlYwCOIXDIuL3giL7D5E77FKP-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC10B6.2\/Team\/","organization_id":13,"user_id":165,"user_is_owner":0,"type_id":"car","year":null,"created_at":"2020-10-01T21:01:20.000000Z","updated_at":"2021-09-19T17:05:20.000000Z","interactivity_id":null,"status_id":null,"url2":null},"user_product":{"id":1776,"picture":"","specification":null,"notes":null,"user_id":2002,"product_id":82,"userproduct_id":null,"order":1000,"quantity":null,"aquired":null,"created_at":"2021-03-25T11:39:50.000000Z","updated_at":"2021-03-25T11:39:50.000000Z","status_id":null,"product":{"id":82,"name":"RC10B6.2","shortname":null,"fullname":"Team Associated RC10B6.2","description":"Champions by design. 1:10 scale 2WD off road has been Team Associated\u0027s signature class since the release of the RC10 in 1984. The Team Associated RC10 buggy series has won 13 of the 18 I.F.M.A.R. World Championships contested since the racing class began. In fact, Team Associated has won more 2WD I.F.M.A.R World Championships than all other manufacturers combined!\r\n\r\nThe engineering continues. The B6 platform introduced the use of two separate chassis configurations -- the B6.2 continues this theme. The B6.2 will be the buggy of choice for high-grip carpet or turf track surfaces with its Laydown transmission assembly and anti-roll bars for optimal mass balance. The B6.2D includes both Layback and Laydown transmission assemblies to fine-tune mass balance to track conditions; add to that the addition of +1 Ackermann plates and gull wing suspension arms to tune the steering for razor-sharp feel and control.\r\n\r\nBoth cars share many great features, such as an easy-access differential, outer rear hinge pins captured with bolt head and locknut for increased durability, new symmetric rear arms that can be flipped to allow an in-between rear shock mounting position, and a new slipper assembly. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!\r\n\r\nDue to ongoing R\u0026D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, fan, and pinion gear. Assembly and painting required. Features Lightweight 7075-T6 hard anodized and +3mm increased length New symmetric 75mm rear arms with improved geometry and stiffness can be flipped to allow an in-between rear shock mounting position Longer rear arm (75mm) improves stability and jump landing Outer rear hinge pins captured with bolt head and lock nut for increased durability Updated left side rail with motor fan mount (fan not included) New rear hub assembly with modular vertical ball stud camber link mount and axle height adjustment New front wing mount and front wing included Bolt-on +1 steering block arms for improved steering response 69mm CVA bones for reduced bone plunge and minimized friction at drive pin New body design with lower center of mass Clear body and wing included 24g and 36g steel chassis weights included for improved balance and lower overall center of mass 5mm aluminum clamping wheel hexes Fluid filled gear differential 3-gear Laydown Stealth(R) transmission for lower and forward CG Differential height adjustment with 0, 1, 2, and 3mm inserts included 7075-T6 aluminum arm mounts with optimized roll center positions and inserts for tuning anti-squat and toe adjustments Heavy-duty V2 routed graphite front shock tower with tower guard Heavy-duty V2 routed graphite rear tower, standard V2 12mm Big Bore threaded aluminum shocks with X-rings","picture":"images\/1352\/conversions\/IOOV0boRfy5ywlXYlYwCOIXDIuL3giL7D5E77FKP-preview.jpg","url":"https:\/\/www.associatedelectrics.com\/teamassociated\/cars_and_trucks\/RC10B6.2\/Team\/","organization_id":13,"user_id":165,"user_is_owner":0,"type_id":"car","year":null,"created_at":"2020-10-01T21:01:20.000000Z","updated_at":"2021-09-19T17:05:20.000000Z","interactivity_id":null,"status_id":null,"url2":null}}})){kind=link}