


Ant1 Hy
![]() |
Arrma TYPHON 6S BLX 1/8TH BUGGY RTR V5Car by Arrma Setups |
![]() |
Axial SCX10™ II Deadbolt™ 1/10th Scale Electric 4WDCar by Axial Setups |
![]() |
Traxxas E-Revo 1/16Car by Traxxas Setups |
3D Print Files - Body Mount Add-on for Long travel shock mounts for Axial SCX10 2This is an add-on for body post/mounts if you printed my remixed long travel shock mounts/hoops ( https://www.thingiverse.com/thing:4854376 )
These just bolt onto the inside of the shock mount. Future goals are to make magnetic and velcro body mounts in the event you don't want to cut more holes in your body. |
3D Print Files - Long travel shock mounts for Axial SCX10 2This is the V1.0 of shock hoops for the SCX10 2 that allows for scale angle shocks (straight up and down, not angled) and allows for long shock travel while maintaining a low ride height.
The shocks I used in particular are the Proline Powerstroke XT with two 3/32 holes drilled in pistons in conjunction with 10wt shock oil. I used these shocks because they have a shock travel of slightly more than 1.6" (replicates full scale of 16" travel coilovers). The goals for the next version are: To reduce binding in steering ( axial long servo horn contacts panhard mount). To reduce binding at extreme flex angles on the top shock screw/mount hole Create a mounting mechanism for a body (Although the shocks and shock mounts will come through the body so holes will have to be made) Update 5/11/21: Add-on body post/mount can be found here: ( https://www.thingiverse.com/thing:4856123 ) |
Tac
|
Organizations |
|||
---|---|---|---|
![]() |
JQRacing Fan | ||
![]() |
Mayako Fan | ||
![]() |
Axial Customer | ||
![]() |
Traxxas Customer | ||
![]() |
Arrma Customer | ||
Users |
|||
![]() |
Kevin Lachapelle Fan | ||
![]() |
Antoine Brunet Fan | ||
![]() |
William Smith Fan | ||
![]() |
RC Mumuse Fan | ||
![]() |
Ryan Maifield Fan | ||